| FEATURED - makeSEA 3D printed brushless motor | Approved | 1.0 | makeSEA Support | 7 Years Ago | |
| FEATURED - makeSEA windpowerWriter Wind Turbine Project | Approved | 5.3 | Roberta Dobolek | 7 Years Ago | |
| FrontPage | Approved | 1.3 | makeSEA Support | 7 Years Ago | |
| How To & Tips and Tricks | Approved | 19.6 | makeSEA Support | 3 Years Ago | |
| makeSEA 3D Printed Brushless Motor v0 (prototype) | Approved | 1.8 | makeSEA Support | 7 Years Ago | |
| makeSEA Analysis - Brushless Motor - Selecting the Magnets | Approved | 2.2 | makeSEA Support | 4 Years Ago | |
| makeSEA Analysis - Magnetic PLA - Electromagnetic Tests | Approved | 1.8 | Roberta Dobolek | 7 Years Ago | |
| makeSEA Analysis - Printing Conductive PLA from Proto Pasta with Replicator 2x - Isolation | Approved | 1.8 | Roberta Dobolek | 7 Years Ago | |
| makeSEA Analysis - Printing Conductive PLA from Proto Pasta with Replicator 2x - Resistance | Approved | 1.8 | Roberta Dobolek | 7 Years Ago | |
| makeSEA Brushless Motor v2 | Approved | 1.4 | Roberta Dobolek | 7 Years Ago | |
| | | | | |