Showcase
This collection of useful parts and objects is yours to use. All we ask is that you register derivative projects with makeSEA to help track their evolution (privately or publically). You can also use makeSEA to share or sell your designs and mashup your work with the work of others. Keep track, and ensure that everyone that contributes receives attribution. Protected files are makeSEA assets that can be distributed to other systems and link back to the original files at makeSEA. You can distribute these reference assets freely without concern for access restrictions. makeSEA still requires users to login to access the unprotected original files. Share! Print! Go make something!
Related Posts
Snap Fit Cantilever
Snap: Fit Cantilever
This Snap Fit is permanently locking - basically it can’t be dismounted. By designing a small hole at the location of the hook, the hook could be bent back by pushing a small pin through the hole (an option to make it unmountable).
There is another design named “Snap Fit Cantilever B”, where the hook has a less sharp angle, which can be disassembled. The f3d-File has a parameter for the hook angle - the design is the same for both types of Snap Fit.
While the shape of this Snap Fit is quite simple, the disadvantage is the relative long length for the hole: in order to make the beams flexible enough, the length should be at minimum 8 times larger than the hook width. It also depends on the material. For printing it’s recommended to use the layering as in the images above (due to the reduced robustness along z).
Visit the wiki post for an overview of all the objects available in the Library of Useful Objects.