Flexion Hinge - makeSEA

Project Summary

It’s recommended to use a flexible material (PETG, BDP, etc.). PLA breaks too quickly. The bending part needs to be as thin as possible in order to last for a while - larger thickness will cause more stress and fail sooner. Bending thickness of stl-files is either 0.2mm or 0.3mm.

Project Details

For 3d-printing select slicing layer thickness of 0.1mm or 0.15mm so the hinge has 2 thin layers at the bending part.

Go to Member Projects Showcase to view more amazing makeSEA projects.

Average (0 Votes)

Assets

Hinge Living Flexion s_2 t01 h20.stl

Hinge Living Flexion s_2 t01 h30.stl

Hinge Living Flexion s_2 t02 h30.stl

Hinge Living Flexion s_3 t03 h30.stl

Hinge Living Flexion s_3 t04 h30.stl

Hinge Living Flexion s_3 t04 h50.stl

Hinge Living Flexion.f3d

Hinge Living Flexion.step

Related Assets
Remote Assets