Go make something®.

EinScan

EinScan 3D scanning techniques and assets

CA Modern House

This is a demo of a modern California style house designed to be viewed at full scale.  Definitely a work in progress.

MCtest

This is a test.   This is only a test.  Do not attempt to adjust your set.

Heating Infrastructure

Click here to edit your project summary.  You can include inline images if you prefer.

Half Dome

This is an experimental 3D modeling project of Half Dome in Yosemite, CA.

HACAMAT MAKİNESİ

hidrocell

helikopter disli sistemi

windpowerWriter Smart Wind Turbine

This is a 3D-printed, fully functional Wind Turbine (WT) at small scale, using commonly available printing technologies and materials.

makeSEA Brushless Motor - 60W

Setting itself apart from other 3D-printed motor prototypes, makeSEA’s brushless motor can be printed on most consumer-grade 3D printers and assembled by virtually anyone. It is fully functional, reliable

Water Turbine

This project is to build a 3d-printable water turbine re-using the brushless motor - generator design. In contrast to the wind turbine this system should produce a considerable amount of energy.

Torsion Hinge

In contrast to the flexing hinge, this hinge has thin parts, which are stressed only by torsion. The torsion bands are long enough to avaid plastic deformation.

Spatula Collection Version B with Teeth

This collection mimics the B Collection but with the addition of teeth for more grip! Use it as needed to mix, spread and lift materials in the kitchen, the craft room, garage... uses are endless!

Spatula Collection Version A with Teeth

It’s the same design as “Spatula A“ but the blade is toothed. Useful for distributing even amounts of all kind of gels on a surface. In the model the tooth size depends on the tooth distance.

Spatula Collection Version B

Same blade as “Spatula A” but with a different shaped handle. The handle in the STL files has a fixed size (60mm long, 12mm thick, 20mm width). Handle parameters and slant of blade front can be adjusted

Spatula Collection Version A

This broad handled "spatula" is well suited for mixing, spreading and lifting of materials such as plaster and paint, but is also at home in the kitchen!

Solar Water Distiller

This project is to design a 3d printable system which can clean polluted water.

Snap - Fit Round Version B

It’s a dismountable snap fit. The holding force is relatively low (depending on the hook width). The knob is the protruding middle part between two holes. If the two parts are snapped together, they can
Showing 81 - 100 of 116 results.